|
| |
|
|
Cyclonator Closed Loop Washrack System
|
The Cyclonator® is a
closed loop wash rack system. The filtration system recycles
wash water from the above ground wash rack, or it can be
used with an existing trench drain or sump. The zero
discharge process allows environmentally safe cleaning by
using a simple filtration process and features a built in
oil-water separator. You can use your own pressure washer
with the Cyclonator®. Not only can the Cyclonator® be used
for equipment washing, but it can save powder coaters
thousands of dollars by recycling your phosphate
pre-treatment chemicals. Whether you are degreasing
equipment or acid washing parts, the Cyclonator® can save
you time and money while avoiding EPA fines.
|
Fast to Setup, Easy to Operate, Simple to Maintain
-
The Cyclonator®
provides a cost effective means of cleaning equipment
while preventing ground water contamination and
simultaneously reducing water/sewage costs.
-
The Cyclonator® is
modular and semi-permanent. It can easily be expanded
from 6' x 6' to 30' x 60'. It can be set up on any
reasonably hard surface, gravel, dirt, pavement, etc.
Any or all of the components can be set up indoors or
outdoors.
-
The standard
Cyclonator® is closed loop. (The effluent water may be
disposable under some conditions in some areas. Check
with your local water treatment plant)
-
Each Cyclonator® wash
rack is water tight and seals securely to adjoining
racks to prevent gaps in containment. All wastewater is
captured and filtered.
|
|
